T316 165x800 Mesh Dutch Weave 15 Micron Filter Cloth
Dutch Weave wire mesh is produced by the use of coarse mesh (mesh
wire, woven wire mesh, wire mesh basket) in the warp and a fine
mesh with relatively smaller wire in the weft. This weave results
in greater strength with very fine openings and is primarily used
as a filter cloth. The shape and position of the openings and
particle retention and increase filter cake formation.
Twilled Dutch Weave is produced by a combination of the features of
the Dutch Weave and the Twilled Weave. Weft wires are passed
alternately over and under two warp wires forming a fine mesh in
one direction and a coarse mesh (mesh wire, woven wire mesh, wire
mesh basket) in the other. This type of weave is capable of
supporting greater loads than the Dutch Weave, with finer openings
than the Twilled Weave. It is used in applications where the
filtering of heavy material is necessary.
Mesh with a Dutch weave is woven to a precise tolerance for a much
denser finished material with small, curved tunnel-shaped openings.
Light does not pass through Dutch-woven micronic filter mesh. Thick
and sturdy Dutch weaves are typically used for hydraulic fluid
filters, gas diffusers, vacuum filters, pressure liquid filters,
and breather vents.
Dutch weave is divided into plain Dutch weave and twill Dutch
weave. 165x800 Mesh uses twill Dutch weave.
| U.S. | Metric |
| MESH SIZE | 165x800 per in | 165x800 per 2.54 cm |
| WIRE DIAMETER | 0.0028x0.0020 in | 0.07112x0.0508 mm |
| OPENING | 0.0006 in | 0.01524 mm |
| OPENING MICRONS | 15 | 15 |
| POROSITY | 54 | 54 |
| OVERALL THICKNESS | 0.0060 in | 0.1524 mm |
| WEIGHT/SQUARE | FOOT0.1200 | lb0.0545 |
Features
15 micron precision woven stainless steel screen
Used in separation, fuel filters, gas diffusers and vents
Light tight mesh
Flow Data is available
Meets ASTM E2814-18
Stainless Steel 316
