SS316L 400 Mesh Ultra Fine Stainless Steel Woven Wire Mesh For
Filter and sieving
Our company manufactures and supplies stainless steel wire mesh
products to meet and exceed our client’s specific requirements,
reducing costs while increasing production efficiency. We have a
full range of 304 and 316 stainless steel woven mesh products
available for immediate shipping and we can supply our clients with
extra wide wire cloth products of up to 240″ wide and extra-long
rolls of up to 2000″. Hightop’s wire mesh products comply with the
ASTM E2016, ASTM E2814 and ISO 9044 as our minimum standard.
400 mesh ultra fine stainless steel woven wire mesh is a very
competitive product among many products in our factory. "Mesh" is
the unit of specification for stainless steel wire mesh, which
refers to how many holes there are in a length of 1 inch (25.4 mm).
400 mesh stainless steel wire mesh is 400 meshes in one inch
length. 400 mesh ultra fine stainless steel wire mesh is also
called 400 mesh filter cloth, 400 mesh filter screen, 400 mesh
screen and so on.
The wire diameters suitable for the production 400X400 mesh ultra
fine stainless steel woven wire mesh is 0.03 mm. The following are
detailed data about this product:
| Mesh | Construction Type | Wire Diameter (mm) | Width of Opening (mm) | % of Open Area | Weight (kgs/m2) |
| 400X400 | Woven | 0.03 | 0.034 | 27.00% | 0.18 |
The widths we often produce are3F, 1 meter, 1.2 meters, 1.5meters,
1.8 meters, and 2 meters. The length of each roll is usually 30
meters and 100F. We can customize special sizes according to your
requirements.
Features:
1. Good acid resistance, alkali resistance and corrosion
resistance;
2. High strength, strong tensile force, toughness and abrasion
resistance, durable;
3. Resistant to high temperature oxidation.
4. Processing at room temperature, easy to make various shapes;
5. High smoothness, no need for surface treatment, convenient and
simple maintenance.
6. Material can easily bend by hand and cut with scissors or laser
7. Commonly used for laboratories and filters
Unlike other metals, stainless steel wire mesh is uniquely equipped
to resist rust and abrasion. Stainless steel wire mesh contains
chromium and nickel in addition to steel, increasing corrosion
resistance. It's also extremely durable, as well as heat and cold
resistant. Keep in mind stainless steel is non-magnetic in the
annealed condition. After stainless steel wire mesh has been woven,
it may become slightly magnetic due to cold working.
We can produce stainless steel wire mesh with stainless steel wire
material in SUS/AISI 316, 316L ,MONEL.The relatively more used
materials is 316.
| T316 Stainless Steel-Standard Chemical Composition |
| Maximum Carbon (C) | Maximum Manganese (Mn) | Maximum Phosphorus (P) | Maximum Sulphur (S) | Maximum Silicon (Si) | Chromium (Cr) | Nickel (N) | Mo |
| 0.08 Max | 2.0 %
| 0.045 %
| 0.03 %
| 1.00 %
| 16.00 to 18.00 % | 10.00 to 14 % | 2.0 to 3.0 % |
T-316 is a special stainless alloy, which contains 18 percent
chromium and 10 percent nickel, as well as 2 percent molybdenum.
This combination enables the mesh to resist corrosion from salts,
acids, and seawater.
T-316 melts at 2500 degrees F (1375 C), but its maximum recommended
temperature for continuous service is 1500 degrees F. (815 C) and
is useful for intermediate service up to 1650 degrees F (900 C).
Its uses include processing oils and foods, chemicals, and
pharmaceuticals. T-316 stainless steel is heat resistant and has good oxidation
resist resistance to a temperature of approximately 1600oF in
intermittent service and to a temperature of 1700oF in continuous
service. |
T-316L stainless steel wire mesh is often used and found in
applications and industries highlighted below:
Marine technologies Pharmaceuticals Chemical processing
Food preparation & processing Rubber, plastic machinery Boat &
yacht fittings
Scientific & laboratory use Automotive Refinery & oil field
Aerospace Particle separation General industrial use
In addition, our 400mesh ultra fine stainless steel woven wire mesh
produced with Monel 400® stainless steel wire is also favored by
many customers.Monel 400® wire mesh is known for its exceptional
strength and resistance. It is made primarily from nickel and
copper alloys and holds up under high temperatures. This
high-performance mesh is typically used in marine, chemical, power
generation, and aerospace environments, but it is suitable for
various applications including commercial cooking, filtration,
heating, boiling, dyeing, refining, demistering, and desalination.
In addition, it can be easily welded, which adds to the versatility
of the material.
400 mesh ultra fine stainless steel woven wire cloth are widely
used in the chemical industry for oil and gas separation, precision
screening and filtration, battery manufacturing, aerospace, etc.
due to its precise filtration characteristics.
We can cut stainless steel wire mesh into different shapes and
sizes according to your needs, such as rectangular mesh, square
mesh, round and oval mesh. It can also be processed into other
shapes of filters.
Stainless steel wire mesh packaging: Generally, it is packaged in kraft paper, wrapped with waterproof
plastic sheet, and then packed into a fumigation-free wooden box.
