Monel knitted wire mesh/gaskets are produced by special weaving machines, use monel wire as raw
material, the finished product is knitted wire mesh tube. Monel
knitted wire mesh is most commonly used as economical gaskets for
EMI shielding. Monel knitted wire mesh has good corrosion
resistance in all extreme environments and it is reasonably
conductive and is tough with high tensile strength, giving good
wear characteristics.
We can offer monel knitted wire mesh in the standard
specifications, opening sizes range from 1 mm x 1 mm to 6 mm x 6
mm, while wire diameters range from 0.10 mm to 0.28 mm, and the
manufactured width is up to 600 mm, although more typically 20 mm
to 100 mm.
The standard wire material are Monel 400. Monel 400 is an extremely
combination property nickel alloy contains approximately 67%
nickel, 28% copper and 5% others, in the hydrofluoric acid and
fluoride gas medium with excellent corrosion resistance, it is more
resistant to oxidation than higher copper alloys and more resistant
to reducing conditions than nickel.
Benefits
Light weight and durable
Greater strength and toughness
Soft and nonmagnetic
High temperature and excellent corrosion resistant
Application
Usage of Monel knitted wire mesh includes:
In the filtration & separation applications, for the screen of the
mist eliminator.
In the EMI & RFI shielding applications, for shielding gaskets,
elastomer cores and cable wrap.
Monel knitted wire mesh materials
Knitted wire mesh is available in three series of different wire
materials:
Pure nickel: Nickel 200/201, Nickel 270
Nickel Alloy: Cr20Ni80, Monel 400, Inconel 600
Others available, please ask
Monel knitted wire mesh rolls
Roll width 3 mm, 15 mm, 25.4 mm, 50.8 mm to 600 mm (measured on
flat)
Roll length 15 m, 30 m, 50 m to 200 m
Other rolls size on request
When ordering or requesting a quote for monel knitted wire mesh,
please specify:
Number of length 30 m rolls or size required
Width eg. 25.4 mm
Diameter of wire eg. 0.11 mm
Aperture eg. 1 mm x 1 mm
Material eg. Monel 400
